How to set up bm-800 microphone with shock case?

Beside above, how do I connect my BM 800 condenser microphone?

Also know, how can I make my BM 800 sound better?

People ask also, can I use BM 800 without phantom power? The BM-800 is a cheap chinese microphone that uses a usual garden-variety pre-charged electret microphone element that does not need phantom power.

Also the question is, how do I connect my BM 800 to my mixer?

Can I use condenser mic without phantom power?

Although there’s no way to use a condenser mic without phantom power, you can use a condenser mic without an audio interface, or mixing board, straight to your computer. To do that you need you need an XLR to USB pre amp, such as the MXL Mic Mate Pro.

How do I connect my BM-800 microphone to my computer?

How do I connect my condenser mic to audio interface?

How do I use my BM-800 microphone on Mac?

See also  How to record to audacity from microphone input on acer computer?

How do I get rid of hiss bm800?

How do I reduce background noise on my BM-800?

Always use headphones to monitor audio quality. Keep mic cables away from power cables. Make sure recording levels are not to low or high.

Does Phantompower remove static?

Phantom power therefore does not reduce noise, but it does provide the microphone with the necessary boost in power that it needs to record audio. … This is likely to be due to a faulty XLR cable, but turning on phantom power will simply mask the problem rather than reducing it.

What can I use instead of phantom power?

If your mixer or interface does not provide phantom power, you will need an external 48V power supply. This should be used with an interface or preamp that gives you gain control in order to adjust the amount of signal from your microphone once it’s powered.

What do you do if you don’t have phantom power?

This phantom power comes from the battery or mains power that runs whatever piece of equipment you’re using. You just have to flip a switch to turn it on. If you plug in a dynamic microphone to a source with phantom power, but you don’t need it, most modern mics are designed to simply ignore it.

How do I connect a condenser microphone to my computer?

Do you need sound card for BM-800?

From what I have been able to gather, the BM-800 looks like a nice 16mm large diaphragm condenser microphone and there may be a version with a battery compartment. If yours does not have this compartment, then yes, you will need some source of phantom power, but it doesn’t have to be from a discrete phantom supply.

See also  Frequent answer: How to adjust levels in windows 10 for headset microphone?

Can I use BM-800 without sound card?

As you already have a BM-800, you really will not need any extra interface. If you work on a PC, the system will provide enough power for the condenser mic to run. While on a laptop, you will have to connect it to the mains via the charger to unlock the full potential of the condenser mic.

Is bm800 a good mic?

If you are looking for an inexpensive microphone, the BM-800 is a great choice. As it is a condenser microphone, it captures more detail and low volumes than your typical dynamic microphone. … The shock-mount is tight, and the microphone does not move. In general, built quality is excellent for the microphone.

Back to top button