How to load upper cassette of canon printer ip7220?

Loading Small Size Photo Paper in the cassette (upper) The machine feeds photo paper from the cassette (upper) automatically if you select a page size such as 4″ x 6″ (10 x 15 cm) or 5″ x 7″ (13 x 18 cm) in the print settings at the operation panel or the printer driver.

Moreover, how do you put paper in an upper cassette? Insert paper with the glossy or printable side facedown. Note: Make sure the paper is loaded against the front edge guide and not overlapping the rear of the cassette. Slide the side edge guides against the paper, but not too tightly. Note: Make sure the paper is under the tabs on the edge guides.

Furthermore, how do I change the cassette on my Canon printer?

  1. Make sure that the machine is turned on.
  2. Flick the HOME screen, then tap Setup. Using the Operation Panel.
  3. Tap Device settings. The Device settings screen is displayed.
  4. Tap Cassette settings.

Additionally, how do you load paper into a Canon cassette?

  1. Prepare paper.
  2. Pull out the cassette (A) from the printer.
  3. Remove the cassette cover (B).
  4. Slide the paper guide (C) in front and (D) on the right to open the guides.
  5. Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of the cassette.
See also  How to connect iphone to epson printer via wifi?

Best answer for this question, how do I setup my Canon printer wirelessly?

  1. Start with, hit the power button on printer to make it ‘ON’.
  2. Thereafter, go to the printer ‘Home’ from the touch screen and then press and Hold ‘WiFi’ button.
  3. Next, select ‘LAN Wireless set up’ option> press ‘OK’.
  4. Choose your WiFi Network (named Canon in your router setting).

How do I load photo paper into my Canon printer?

Load photo paper with the glossy side facing up. Slide the paper guides (D) to align them with both sides of the paper stack, being careful not to push the paper guides too hard against the paper. Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause jams.

How do you load paper into cassette 1?

  1. Close the output tray, if necessary.
  2. Open the front cover.
  3. Pull out the upper paper cassette.
  4. Slide the edge guides outward.
  5. Set the front edge guide to the position for the paper size you are using.

Where does the paper go in a canon mx920 printer?

(1) Pull out the cassette (lower) from the machine. (2) Slide the paper guide (A) in front and (B) on the right to open the guides. (3) Load the paper stack WITH THE PRINT SIDE FACING DOWN, and place it in the center of the cassette (lower).

What is cassette 1 on a printer?

You can load photo paper and other media in these sizes in the upper paper cassette: 3.5 × 5 inches (89 × 127 mm) 4 × 6 inches (102 × 152 mm)

See also  Frequent question: How to set up printer for receipt on square?

How do I change the cassette on my printer?

From the control panel Make sure the printer is turned on and press the Setup button. Press the down arrow and select Printer Setup, then press OK. Select Paper and Size Loaded, then press OK. Select Cassette 1 and press OK.

How do I load photo paper into my Canon tr8500?

  1. Open the rear tray cover (A) and then pull up the paper support (B).
  2. Open the feed slot cover (C).
  3. Slide the paper guides to open them, and load the paper in the center of the rear tray WITH THE PRINT SIDE FACING UP.
  4. Slide the paper guides (D) to align them with both sides of the paper stack.

How do I change my print from rear tray to cassette?

  1. Open the printer driver setup window.
  2. Select the media type. Select the type of paper loaded in the printer from the Media Type list on the Main tab.
  3. Select the paper source.
  4. Click OK.

Where do you load paper in a Canon Pixma printer?

Load the paper in the center of the front tray WITH THE PRINT SIDE FACING DOWN. Push the paper stack all the way to the back of the front tray. Always load paper in the portrait orientation (D). Loading paper in the landscape orientation (E) can cause paper jams.

How do I load photo paper into my Canon tr7520?

  1. Prepare paper. Align the edges of paper. If paper is curled, flatten it. Note.
  2. Load paper. Open the rear tray cover (A) and then pull up the paper support (B). Open the feed slot cover (C). Slide the paper guides to open them, and load the paper in the center of the rear tray WITH THE PRINT SIDE FACING UP.
See also  How to enable printer sharing in windows 10?

How do I load photo paper into my Canon tr4522 printer?

  1. Prepare paper.
  2. Open the front cover (A) gently.
  3. Grab handle part of front cover and pull out cassette until it stops.
  4. Use the right paper guide (C) to slide both paper guides all the way out.
  5. Load paper stack in portrait orientation WITH PRINT SIDE FACING DOWN, and place it in center of cassette.

How do I connect wirelessly to my printer?

Back to top button