Frequent answer: How to make hp laser printer m277c6 take paper out of tray?

Open the System Setup menu, and then open the Paper Setup menu. Select the tray that you want to configure. Select Paper Type, and then select the desired paper type for the tray. Select Paper Size, and then select the desired paper size for the tray.

Similarly, how do I get my HP manual feed tray to print?

  1. Make sure that the product is idle and the Ready light is on.
  2. Access the product Properties dialog box.
  3. Click the Paper/Quality tab.
  4. Select Manual Feed from the Source is drop-down list.
  5. Load paper or an envelope into the priority feed slot, depending on the print job.

Frequent question, why is my HP printer not recognizing paper in the tray? The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.

See also  How to online epson printer?

Correspondingly, how do you remove paper stuck in HP laser printer?

In this regard, how do I change my paper tray settings?

  1. At the printer control panel, log in as administrator, then press the Home button.
  2. Touch Device > Paper Trays.
  3. Select a tray.
  4. To set the level of restriction on the paper tray, touch Tray Mode and select an option.

How do I change my printer from tray 1 to Tray 2?

Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.

How do I change my printer from manual feed?

Select Print Settings from the print options pop-up menu. Click Basic and select Auto Select or Tray1 for Paper Source. Click Print. The Auto Select setting will automatically pull paper from any paper source (tray or manual feed slot) that has a defined paper size that matches your document.

How do I get my printer out of manual feed?

Use both hands to slide the manual feed slot paper guides to fit the width of the paper you are using. Using both hands, put one full sheet of paper or one envelope in the manual feed slot until the front edge touches the paper feed roller. When you feel the machine pull it in, let go. The document will be printed out.

How do you fix a paper empty in manual feeder?

If the paper is not feeding properly, pull the paper out of the printer. Close the manual feed slot cover. Open the printer front cover and then close it. Re-load the paper in the manual feed slot to resume printing.

See also  Frequent answer: How to share a printer windows 10?

How do I fix my printer not picking up the paper?

What to do when your printer says there is no paper but there is?

If you keep on getting error messages saying there is no paper in the printer, check the paper rollers and clean any specks of dust or debris. Also, make sure the paper stack is not wrinkled or bent. Take out the stack of paper and push the tray back in. Take it out again and put back the paper.

How do you fix a printer that says out of paper when it’s not?

  1. With the printer turned on, disconnect the power cord from the rear of the printer.
  2. Unplug the power cord from the wall outlet.
  3. Wait at least 15 seconds.
  4. Plug the power cord back into the wall outlet.
  5. Reconnect the power cord to the printer.
  6. Turn the printer on.

How do you get stuck paper out of a HP Neverstop laser printer?

What causes paper jams in laser printers?

Low Quality and Improper Storage of Ink and Toner Cartridges. Low-quality cartridges or improperly stored cartridges can cause paper jams. For example, too much toner or ink can be released onto the paper, or the toner or ink can clump together in the cartridge.

How do I remove the paper jam from my HP LaserJet m479fdw?

  1. Open the rear door. Figure : Open the rear door.
  2. Gently pull out any jammed paper from the rollers in the rear door area. Figure : Remove jammed paper.
  3. Close the rear door. Figure : Close the rear door.
See also  Frequent answer: How to enable file and printer sharing in windows 7?

How do I get my printer to print from different trays?

  1. Click on the start button.
  2. Select “View Devices and Printers”.
  3. Right click on the printer icon, select “Printer Properties”.
  4. Select the “Printer” tab.
  5. In the “Printer Option Configuration” section of the dialogue, select how many trays have been installed.

Back to top button