Best answer: How to change the drum in brother printer mfc 9340?

Touch the dial pad area to light up the LEDs. Press and hold # until the machine’s display message changes. Press the color of the drum unit you replaced. Press Yes.

Also know, how do you reset the drum on a Brother MFC 9340?

  1. Press “X” to clear the error message.
  2. Press the tools button (picture of a spanner).
  3. Press “All Settings”.
  4. Press “Machine Info”.
  5. Press “Parts Life”.
  6. Press “#” until the touch screen message changes.
  7. Press the colour of the drum that was replaced.
  8. Press “Yes”.

Quick Answer, how do I change the drum on a Brother printer?

  1. Make sure the machine is turned on and open the front cover.
  2. Remove the toner and drum assembly from the machine.
  3. Push down the green lock lever and take the toner out of the drum.
  4. Unpack the new drum unit.
  5. Insert the toner in the drum.

In this regard, where is the drum on a Brother MFC? For Brother printers, the drum unit is usually connected to the toner cartridge. 1. To find it, simply open the front flap of your laser printer and find the toner cartridge(s) which the drum unit will be attached to or beneath.

See also  How to install canon printer in laptop without cd?

Also the question is, how do you reset change drum soon on Brother?

  1. Open the front cover.
  2. Press the CLEAR key.
  3. Press 1 to reset.
  4. Close the front cover, pressing firmly on each side until they click into place.
  1. Make sure that the machine is turned on.
  2. Open the top cover until it locks in the open position.
  3. Take out the toner cartridge and drum unit assembly for the color shown on the machine’s display.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.

What is drum stop on Brother printer?

If the machine LCD display or the status monitor displays ‘Drum Stop’, this is a warning to let you know you need to replace your drum as it has reached its end of life. The drum for this model is the DR-420. The drum unit is a consumable item and it is necessary to replace it periodically.

How do you change the drum on a Brother MFC L2710DW?

  1. Make sure the machine is turned on.
  2. Open the front cover.
  3. Remove the toner cartridge and drum unit assembly from the machine.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.

How do you replace the drum on a Brother mfc 7360N?

  1. Turn on the printer.
  2. Open the front cover and let the printer sit for ten minutes so it can cool down.
  3. Remove the drum unit and toner cartridge from the printer.
  4. Separate the toner cartridge from the drum unit by pressing down on the green lever.
  5. Open up your new drum unit.
See also  How to connect hp printer to computer without disc?

Do I need to replace the drum on my Brother printer?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do I reset my printer after replacing drums?

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.

How do I reset my Brother MFC L2710DW drum?

  1. Make sure the machine is turned on.
  2. Close the front cover.
  3. Press OK and the Up arrow key at the same time.
  4. Press OK to select Drum.
  5. Press the Up arrow key to reset the drum counter.

What happens if I don’t replace printer drum?

A degraded drum unit can cause streaks, smudges, and blank spots on your printed page even if you just inserted a new printer toner. While a broken drum unit won’t break your printer, it will just fail to stop printing at a certain point.

How do you reset the drum counter on a Brother MFC L3770CDW?

  1. Make sure the machine is turned on.
  2. Press and hold for about five seconds.
  3. Press [Drum].
  4. Select the toner color for the drum unit you just replaced.
  5. Press [Yes].

How do you change the drum on a Brother MFC L2700DW?

  1. Turn your Brother MFC L2700DW machine on.
  2. Open the front cover.
  3. Remove the toner and drum unit assembly.
  4. Push the green lock lever and detach toner cartridge from the drum unit.
  5. Open new drum unit.
  6. Insert toner cartridge into new drum unit.
  7. Clean the corona wire.
See also  Frequent answer: How to get my wireless hp printer to print wedding invitations?

How do you change the drum unit on a Brother MFC 7860dw?

  1. Turn on the printer.
  2. Open the front cover and let the printer sit for ten minutes so it can cool down.
  3. Remove the drum unit and toner cartridge from the printer.
  4. Separate the toner cartridge from the drum unit by pressing down on the green lever.
  5. Open up your new drum unit.

How do you reset the drum on a Brother printer MFC 9130cw?

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press. (Settings).
  4. Press All Settings. (This step might be skipped in some models.)
  5. Choose Machine Info. or Machine Information => Parts Life.
  6. Press and hold Drum or Drum Life until the machine’s display message changes.
  7. Press Yes.
  8. Press.

Back to top button